Polyurethane Sealant for Automotive Glass LW-S11

LW-S11 PU sealant is suitable for all kinds of vehicle windshield adhesive,coverings adhesive and other parts of the high strength adhesive,etc.Applied to substance such as glass,stalinite,iron and steel,aluminum alloy (including painted alloy).

Description

Polyurethane Sealant For Automotive Glass LW-S11

 Product Features:

1. One-component polyurethane sealant for windshield;

2. High strength, high viscosity;

3. Good thixotropy,sag resistance,short wire drawing, high initial bonding strength;

4. Vibration fatigue resistance.

Technical Data:

Appearance

Black,

homogeneous paste

Tack free time       

15min~60min

Curing speed        

≥3.0mm/24h

Non-volatile matter content

≥96%

Shore A-hardness    

45~60

Tensile-shear strength

≥4.0MPa

Tensile strenth       

≥6.0MPa

Elongation at break     

≥400%

Tear strength       

≥10.0N/mm

Density        

1.20±0.10g/cm3

Low temperature flexibility      

-40℃ Flawless

Shelf life

(15℃~25℃,≤50%RH)

Rigid packaging:12months

Sausage & plastic drum: 9months

① Standard conditions: temperature 23℃±2℃, relative humidity 50%±5%RH

Application:

Suitable for all kinds of vehicle windshield adhesive, coverings adhesive and other parts of the high strength adhesive, etc. Applied to substance such as glass, stalinite,iron and steel, aluminum alloy (including painted alloy).

Construction Guide:

1.Surface cleaning:

Bonding surface should be clean, dry, no grease and dust. If the surface is easy to rust, which should be in advance cleaned away by metallic brush. If necessary, should use acetone and other organic solvents to clean.

2. Construction:

Barrel packaging: open the cover,pierce the membrane at the nozzle,screw on the nozzle,place the barrel in an applicator glue gun and squeeze the trigger;

Sausage packaging: a barrel gun is required, clip the end of the sausage and place in barrel gun,screw end cap and nozzle on to barrel gun;

Big barrel packaging:according to the extrusion and coating equipment and pump;

According to construction requirements, cut nozzle into appropriate shapes, after the glue adhesive, frictioning, screeding and other truing work should be finished in tack free time.

 Packaging Information:

   Rigid tubes packaging

          310ml

   Sausage packaging

   400ml,600ml

   Plastic drum packaging

   5Gallon(24KG)

 55Gallon(240KG)

Notes:

1. Ambient temperature under 10 ℃ or the output speed can not meet the technical requirements, the pens packaging is advised to oven bake for 1h-3h in 40 ℃ ~ 60 ℃.

2. In order to ensure the sealing blazonry, recommended before gluing stick protective tape.

3. Spray paint after drying, compatibility test should be done before painting.

4. The best construction environment: temperature 15 ℃ ~ 30 ℃, relative humidity 40% ~ 65% RH.

5. To ensure a good adhesive sealing effect and the compatibility of products and base material, should test with the actual experiment base material in the corresponding environment.

6. Keep away from children.

7. Avoid contacting with eyes and skin.Of contact with the skin,in case of eyes and skin contact, wash immediately and thoroughly with soap and water. Seek medical advice urgently if it is serious.

Storage & Transportation:

Transportation: moisture-proof, anti rain, sunscreen, anti high temperature, away from heat source, handle with care, squeezing and collision are not allowed.

Storage: sealed and stored in low temperature and dry place,advise storage in 5-25℃,humidity ≤50%RH.

LW-S11 PU sealant is suitable for all kinds of vehicle windshield adhesive,coverings adhesive and other parts of the high strength adhesive,etc. Applied to substance such as glass,stalinite,iron and steel,aluminum alloy(including painted alloy).PU sealant has better performance with high initial bonding strength, high strength,high viscosity.

With consummate production technique and advanced equipment, Langwei Times is known as one of the leading polyurethane sealant for automotive glass lw-s11 manufacturers and suppliers in China. you are rest assured but cheap polyurethane sealant for automotive glass lw-s11 online with us. We can assure you the low price of our products.

Hot Tags: polyurethane sealant for automotive glass lw-s11 suppliers China, manufacturers, low price, price, cheap

Related Products

Feedback

Products List