Polyurethane Sealant for Automotive Machinery

LW-120C PU sealant for automotive machinery is suitable for visible part of various vehicles body,general joint seam and weld seal.Such as air conditions,apron,luggage compartment,roof,bottom and other parts seals.Suitable substance include wood,iron and steel,aluminum alloy (including painted alloy).

Description

"LangWei" LW-120C PU Sealant For Automotive Machinery

 Product Features:

ØOne-component polyurethane sealant for automobile machinery;

ØMedium strength,medium modulus;

ØMedium and low viscosity, good thixotropy ;

ØExcellent blade coating ,convenient construction.

Technical Data:

Appearance

Black,white,grey, homogeneous paste

Tack free time       

20min~80min

Curing speed        

2.0mm/24h

Non-volatile matter content

96%

Shore A-hardness    

35~50

Tensile-shear strength

1.0MPa

Tensile strength       

1.5MPa

Elongation at break     

400%

Tear strength       

7.0N/mm

Density        

1.40±0.10g/cm3

Low temperature flexibility      

                                              -40℃ Flawless

Shelf life (15℃~25℃,50%RH)

9 months

① Standard conditions: temperature 23℃±2℃, relative humidity 50%±5%RH

Application:

Suitable for visible part of various vehicles body, general joint seam and weld seal. Such as air conditions, apron, luggage compartment, roof, bottom and other parts seals. Suitable substance include wood, iron and steel, aluminum alloy (including painted alloy).

Construction Guide:

1.Surface cleaning:

Bonding surface should be clean, dry, no grease and dust. If the surface is easy to rust, which should be cleaned away by metallic brush in advance. If necessary, should use acetone and other organic solvents to clean.

2. Construction:

Barrel packaging: open the cover,pierce the membrane at the nozzle,screw on the nozzle,place the barrel in an applicator glue gun and squeeze the trigger.

Sausage packaging: a barrel gun is required, clip the end of the sausage and place in barrel gun,screw end cap and nozzle on to barrel gun.

According to construction requirements, cut nozzle into appropriate shapes, after the glue adhesive, frictioning,screeding and other truing work should be finished in tack free time.

Packaging Information:

    

   Rigid tubes packaging

   310ml

    Sausage packaging

   400ml, 600ml

    

   Plastic drum packaging

 

   5Gallon (24KG), 55 Gallon(240KG)

Notes:

ØAmbient temperature under 10 ℃ or the output speed can not meet the technical requirements, the pens packaging is advised to oven bake for 1h-3h in 40 ℃ ~ 60 ℃.

Ø In order to ensure the sealing blazonry, recommended before gluing stick protective tape.

ØSpray paint after drying, compatibility test should be done before painting.

ØThe best construction environment: temperature 15 ℃ ~ 30 ℃, relative humidity 40% ~ 65% RH.

ØTo ensure a good adhesive sealing effect and the compatibility of products and base material, should test with the actual experiment base material in the corresponding environment.

ØKeep away from children.

ØAvoid contacting with eyes and skin.Of contact with the skin,in case of eyes and skin contact, wash immediately and thoroughly with soap and water. Seek medical advice urgently if it is serious.

Storage & Transportation:

Transportation: moisture-proof, anti rain, sunscreen, anti high temperature, away from heat source, handle with care, squeezing and collision are not allowed.

Storage: sealed and stored in low temperature and dry place, advise storage in 5-25℃,humidity ≤50%RH.

LW-120C PU sealant for automotive machinery is suitable for visible part of various vehicles body,general joint seam and weld seal.Such as air conditions,apron,luggage compartment,roof,bottom and other parts seals. Suitable substance include wood,iron and steel, aluminum alloy (including painted alloy).One component polyurethane sealant has better performance with medium strength,medium modulus,medium and low viscosity,good thixotropy. 

 

With consummate production technique and advanced equipment, Langwei Times is known as one of the leading polyurethane sealant for automotive machinery manufacturers and suppliers in China. you are rest assured but cheap polyurethane sealant for automotive machinery online with us. We can assure you the low price of our products.

Hot Tags: polyurethane sealant for automotive machinery suppliers China, manufacturers, low price, price, cheap

Related Products

Feedback

Products List