Home > Knowledge > Content
Butyl tape Construction regulations
Dec 07, 2017

(1) This Regulation applies to civil construction roofing made of adhesive tapes as a waterproofing membrane bonding, metal pressure plate bonding, PC board bonding and the like, metal plate surfaces


Sealed waterproof project.


(2) The design or use of tape, it should be in accordance with the relevant provisions or with reference to my company's corporate standards.


General provisions


(1) Construction is required at a temperature range of -15 ° C to 45 ° C (measures taken in excess of the specified temperature range)


(2) grass-roots surface must be cleaned or wiped clean, dry, no floating soil, oil.


(3) Within 24 hours after construction, the bond can not be torn and peeled off.


(4) According to the actual project needs to choose different models, size specifications of Yongxing tape.


(5) placed about 10cm from the ground on the box, do not stack more than 5 boxes.


Construction tools


Cleaning tools, scissors, pressure Kun, wallpaper knife and so on.


Requirements


(1) adhesive base clean oil-free gray water, water vapor.


(2) In order to ensure the bonding strength of the base surface temperature above 5 ° C, the specific low-temperature environment can be special production.


(3) When used, anti-peeled tape can be used after a lap.


(4) Do not use with benzene, toluene, methanol, ethylene, silicone and other organic materials containing waterproof material at the same time.


Process characteristics


(1) Construction convenient and quick. Yongxing adhesive tape construction should be a bond in place, grass-roots surface clean.


(2) Wide construction environment requirements. Ambient temperature at -15 ° C-45 ° C, humidity below 80 ° C can be normal construction, with strong environmental adaptability.


(3) repair process is simple and reliable. Only large leaks can be single-sided tape.


Products List