Appliaction and Advantage of The Automotive Sealant
Sealant in the car repair, the seal has its particularity. Because most of the joint surface after use and demolition, have occurred in varying degrees of deformation and damage, making the seal leaks increased the difficulty of the "three leakage" problem in the automotive repair industry is particularly prominent. Some parts because of their location and pressure higher relations, the occurrence of oil spills has been high, has become a major problem to improve the quality. Such as the engine's valve chamber side cover in the side position, the internal gas pressure and the role of the side cover for the metal parts easily deformed, and its structure using the middle bolt fastening and many other factors, so that the part of the oil spill problem is particularly prominent The Anaerobic sealant has a good anti-loose effect, can replace the spring washers and flat washers. In the car repair, all the anti-loose bolt can use anaerobic adhesive. Especially in some key parts of the use of bolts, more fully play its unique role. Such as the connecting rod bolts on the engine, because of its reciprocating strong impact load, connecting rod bolts loose problem is very prominent, the use of anaerobic adhesive can solve this problem. Anaerobic sealant can also seal leakproof. Bolt tightened, there is still a gap between the thread, a small amount of leakage can still occur. Especially in some high-pressure parts, leak-proof problem is very prominent. The old method of adding copper pad or lead oil is not ideal, and the use of anaerobic adhesive can solve this problem.