Polysulphides are a type of chemical compound that is based on a structure having chains of sulphur atoms. Polysulphide elastomer was discovered in 1926 by an American chemist while he was attempting to obtain ethylene glycol for use as antifreeze. The elastomer was commercialized under the trade name Thiokol (after the Greek theion, “brimstone” [sulfur] and kommi, “gum”), which eventually became a generic label. It is known for its excellent resistance to solvents and lubricants. This polymer is mainly used in the form of a low-molecular-weight liquid that cures in place to create an elastomeric seal. The sulfur content is high, about 80 percent by weight, making the elastomer a high-density material with a high resistance to swelling by hydrocarbon oils. However, the low stability of the sulfur-sulfur bond also causes a pronounced tendency to relax and flow under pressure. The principal uses are in oil-resistant and weather-resistant seals and gaskets. They are also used in gasoline hoses and as binders for solid rocket propellants.
Products based on polysulphidic polymers can be formulated to be high or low modulus through the choice of polymer, cure system, or compound. They are considered to be durable in a number of adverse environments. Despite this, their resistance to heat is not exceptional. The upper temperature limit for continuous use is less than 100°C and depends, to some extent, on the formulation. The structure of the polymer makes polysulphides inherently resistant to UV and oxidation, but this is influenced by formulation and, in particular, by polymer content. There is plenty of accumulated evidence to relate durability of polysulphide sealants to polymer content, in all applications.
Polysulphide adhesives and sealants are resins that provide a flexible and chemically resistant sealing or assembly element. Single component polysulphide resins are commonly used as construction sealants. Two component epoxy-polysulphide resins provide an adhesive with greater toughness and the sacrifice of some tensile strength compared to pure epoxy resins. Polysulphide adhesives and sealants have excellent resistance to fuels, ozone, salt water, and sunlight.
Polysulphide adhesive and sealant formulations offer good working flow, superior electrical insulation, and corrosion protection. These elastomer compounds react 100% and cure at ambient temperatures or ideally, at slightly elevated temperatures. Properties of polysulphide adhesives and sealants include underwater curing capability, high chemical resistance, high dielectric strength, and raised physical strength. They exhibit high and low cryogenic temperature serviceability, resistance to vibration, impact, shock, and thermal cycling. Polysulphide adhesives and sealants are metal free, show long-term resistance to gasoline, natural gas, gaseous fuels, kerosene, alcohol, crude oils, and its derivatives, are easy to apply with low drippage, and have excellent adhesion capability to similar and dissimilar substrates.
These adhesives and sealants are used in a number of applications and situations. Polysulphide adhesives and sealants are versatile synthetic elastomers that are used in the following industries:
●electronic ●electrical ●computer ●metalworking●appliance●automotive ●chemical
They can be used in a wide range of applications, such as aircraft fuel tanks, electrical potting, and industrial tank liners. They have been successfully used in corrosion protection of offshore structures and provided vibration resistance for electro-optical devices. Polysulphide adhesives and sealants are often used in construction to seal off joints and channels. Polysulphide sealant provides a waterproof seal minimizing the risk of water leaking into an area and causing damage or erosion. Adhesives and sealants made with sulphides are commonly used in large civil engineering applications, including sealing channels in reservoirs and dams, culverts, canals, and flood control waterways. They are also used in high traffic public areas such as in the expansion and contraction joints in sidewalks or floors because they can form a flexible bond that expands and contracts with weather conditions without breaking down. Polysulphide adhesives and sealants are used in the aerospace industry to seal fuel tanks and aircraft fuselages. Since polysulphide adhesives and sealants are resistant to fuels and other chemicals, they can provide a secure, long-lasting seal in these aviation components. A polysulphide adhesive may also be used as a sealing agent between the wooden planks or decking of a boat.